There are numerous kinds of construction elevator, according to its operation mode has no pair of heavy and heavy two kinds, according to its control mode is divided into manual control type and automatic control type. According to the need, you can also add a frequency conversion device and PLC control module, in addition you can also add a floor call device and floor device. At present, most of the market for the use of non-heavy, drive system is placed above the top of the cage, reducing the noise in the cage, so that the cage headroom increases, but also make the transmission more stable, the vibration of the mechanism is smaller, non-heavy design simplifies the installation process; a heavy construction elevator runs more smoothly, additional energy saving, but because of its day pulley structure, the installation of the section will be additional troublesome, so there is a pair of reappear in the market has gradually withdrawn.
Because the operation effect of the elevator is directly affected by the external environment, so before use to test, to focus on detecting the sensitivity of the elevator, to ensure that there is no problem before use. After the use of the process is strictly prohibited in the phenomenon of overload, so as to avoid lifting prolonged time in the state of fatigue work, improve the safety of the use of the elevator. In order to further ensure the safety of the staff, improve the construction quality and progress of the project, in the construction must pay attention to the safe use of the elevator management work, management personnel from the equipment itself, the comprehensive quality of personnel, maintenance and overhaul work and other aspects of its comprehensive, three-dimensional comprehensive management, Brief introduction to 2019 construction elevator operation certificate where to register what register process online registration entrance.
Various processes such as the installation, use and disassembly of one man aerial lift meet the corresponding technical requirements, reduce the probability of accidents in construction, guarantee the life safety of staff to a greater extent, and further promote the safety management level of our construction industry.
There are numerous kinds of construction elevators, according to the operation mode is divided into: no weight and there are two kinds of weight; according to the control mode is divided into manual control type and automatic control type. According to the actual need, it can also add a frequency conversion device and PLC control module, in addition it can also add floor call device and floor device.
Construction elevators are mainly used in construction engineering, mechanical engineering and other larger construction projects. Construction elevators are mainly for light manned cargo, convenient and tiny volume of goods temporary use.
Fixed is a kind of excellent lifting stability, applicable to a wide range of goods. lifting equipment is mainly used in the production line height difference between the goods transport; material online, offline; adjust workpiece height during workpiece assembly; high feeder feeding; large equipment assembly parts lifting; large machine tool feeding, unloading; the warehouse loading and unloading place is equipped with forklifts and additional handling vehicles for rapid loading and unloading of goods. According to the use of requirements, can be configured with accessory devices, any combination, such as the fixed lift safety protection device; electric control mode; work platform form; dynamic form, etc. The correct choice of various configurations can maximize the function of the lift and achieve the best use effect.
Imobile elevator optional configuration of hydraulic power, convenience and the surrounding the lap joint of frame, roller rolling or motor, prevent pinches safe touch, organ type safety guards, moving or motor rotary worktable, hydraulic turn out, to prevent falling elevator safety support bar, stainless steel security guard network, electric or hydraulic elevator power system, universal rolling walking Bead mesa.
Vehicular lift is to improve the mobility of the lift. The lift is fixed on the battery carrier or truck, it takes the car engine power, to achieve the lifting function of the vehicular lift. To adapt to extreme altitude work inside and outside the factory. Widely used in hotels, buildings, airports, stations, stadiums, workshops, warehouses and other places of high altitude work; can also be used as temporary elevated altitude lighting, advertising, etc.
The Aluminum alloy elevator adopts high strength and high-quality aluminum alloy material. Because of the high strength of the profile, the deflection and swing of the lifting platform is minimal. The NEWLY DESIGNED NEW GENERATION LIFT HAS THE ADVANTAGES OF lovely shape, tiny volume, light weight, balanced lifting, safe and reliable, etc. Its light appearance can play the highest lifting ability in a really tiny space. Make single altitude work easy. It IS WIDELY USED IN FACTORIES, HOTELS, RESTAURANTS, STATIONS, AIRPORT theaters, exhibition halls and other places. It is the best safety companion for the maintenance of machines and tools, paint decoration, replacement of lamps and lanterns, electrical appliances, cleaning and maintenance. The main lift is divided into single column aluminum alloy, double column aluminum alloy, three column aluminum alloy, four column aluminum alloy.
The curved arm type aerial work lift truck can overhang operation, cross certain obstacles or carry out multi-point operation in a lifting; the platform can carry a large load, two or more people can work at the same time and can carry certain equipment; lifting platform mobility is excellent, transfer site is also convenient; beautiful appearance, suitable for indoor and outdoor work and storage. Suitable for stations, wharf, shopping mall, sports stadium, residential property, factory workshop and other large-scale operations.
Set of cylinder set of hydraulic elevator for multi-stage hydraulic cylinder upright rise, hydraulic cylinder high strength material and excellent mechanical properties, tower ladder frame, so that the elevator has higher stability. Even from 20 meters in the air, you can feel its superior smooth performance. Applicable occasions: factory buildings, hotels, buildings, shopping malls, stations, airports, stadiums and more main uses: power lines, lighting appliances, elevated pipe installation and maintenance, high altitude cleaning and other single work high altitude work.
Guide rail - type guide rail elevator is a non - cutting fork - type hydraulic lifting platform. Suitable for two or three floors of industrial plant, restaurant, restaurant floor between the transfer of goods. The minimum height of the table is 150-300mm, which is most suitable for the installation and use of workplaces where the pit can not be excavated. The PLATFORM DOES not need the upper lifting point, various forms (single column, double column, four column), stable operation, simple and reliable operation, between the floors of goods transmission economy and convenience.
Construction elevators are widely used in industrial and civil construction, bridge construction, underground construction, large chimney construction and shipbuilding industry and other sites, suitable for vertical transportation of materials and personnel, as a permanent or semi-permanent elevator can also be used in warehouses, towers and other different occasions. With stable performance, safe and reliable, flexible handling, strong adaptability and other characteristics, improve the work efficiency, reduce the labor intensity of construction personnel.